Updating search results...

# Electronic Technology

59 affiliated resources

# Search Resources

View
Selected filters:
Conditional Remix & Share Permitted
CC BY-NC-SA
Rating
0.0 stars

Welcome to the AC Electrical Circuit Analysis, an open educational resource (OER). The goal of this text is to introduce the theory and practical application of analysis of AC electrical circuits. It assumes familiarity with DC circuit analysis. If you have not studied DC circuit analysis, it is strongly recommended that you read the companion OER text, DC Electrical Circuit Analysis before continuing. Both texts are offered free of charge under a Creative Commons non-commercial, share-alike with attribution license. For your convenience, along with the free pdf and odt files, print copies are available at a very modest charge. Check my web sites for links.

This text is based on the earlier Workbook for AC Electrical Circuits, which it replaces. The original expository text has been greatly expanded and includes many examples along with computer simulations. For the convenience of those who used the Workbook, many of the problem sets are the same, with some re-ordering depending on the chapter.

Chapter 1: Fundamentals
Chapter 2: Series RLC Circuits
Chapter 3: Parallel RLC Circuits
Chapter 4: Series-Parallel RLC Circuits
Chapter 5: Analysis Theorems and Techniques
Chapter 6: Nodal and Mesh Analysis
Chapter 7: AC Power
Chapter 8: Resonance
Chapter 9: Polyphase Power
Chapter 10: Decibels and Bode Plots

Subject:
Career and Technical Education
Electronic Technology
Material Type:
Textbook
Author:
James M. Fiore
07/27/2020
Conditional Remix & Share Permitted
CC BY-NC-SA
Rating
0.0 stars

An essential and practical text for both students and teachers of AC electrical circuit analysis, this text picks up where the companion DC electric circuit analysis text leaves off. Beginning with basic sinusoidal functions, ten chapters cover topics including series, parallel, and series-parallel RLC circuits. Numerous theorems and analysis techniques are examined including superposition, Thévenin's theorem, nodal and mesh analysis, maximum power transfer and more. Other important topics include AC power, resonance, Bode plots and an introduction to three-phase systems. Each chapter begins with a set of chapter objectives and includes a summary and review questions. A total of over 500 end-of-chapter exercises are included. A companion laboratory manual is available.

Subject:
Applied Science
Career and Technical Education
Electronic Technology
Engineering
Material Type:
Textbook
Author:
James M. Fiore
10/26/2023
Conditional Remix & Share Permitted
CC BY-NC-SA
Rating
0.0 stars

"The 16 lectures in this course cover the topics of adaptive antennas and phased arrays. Both theory and experiments are covered in the lectures. Part one (lectures 1 to 7) covers adaptive antennas. Part two (lectures 8 to 16) covers phased arrays. Parts one and two can be studied independently (in either order). The intended audience for this course is primarily practicing engineers and students in electrical engineering. This course is presented by Dr. Alan J. Fenn, senior staff member at MIT Lincoln Laboratory. Online Publication"

Subject:
Applied Science
Career and Technical Education
Electronic Technology
Engineering
Material Type:
Full Course
Provider:
M.I.T.
Provider Set:
M.I.T. OpenCourseWare
Author:
Fenn, Alan J.
11/20/2012
Conditional Remix & Share Permitted
CC BY-NC-SA
Rating
0.0 stars

This course will focus for a large part on MOSFET and CMOS, but also on heterojunction BJT, and photonic devices.First non-ideal characteristics of MOSFETs will be discussed, like channel-length modulation and short-channel effects. We will also pay attention to threshold voltage modification by varying the dopant concentration. Further, MOS scaling will be discussed. A combination of an n-channel and p-channel MOSFET is used for CMOS devices that form the basis for current digital technology. The operation of a CMOS inverter will be explained. We will explain in more detail how the transfer characteristics relate to the CMOS design.

Subject:
Career and Technical Education
Electronic Technology
Physical Science
Physics
Material Type:
Activity/Lab
Lecture Notes
Provider:
Delft University of Technology
Provider Set:
Delft University OpenCourseWare
Author:
R.A.C.M.M. van Swaaij
02/20/2016
Conditional Remix & Share Permitted
CC BY-NC-SA
Rating
0.0 stars

An introductory course in analog circuit synthesis for microelectronic designers. Topics include: Review of analog design basics; linear and non-linear analog building blocks: harmonic oscillators, (static and dynamic) translinear circuits, wideband amplifiers, filters; physical layout for robust analog circuits; design of voltage sources ranging from simple voltage dividers to high-performance bandgaps, and current source implementations from a single resistor to high-quality references based on negative-feedback structures.

Subject:
Career and Technical Education
Electronic Technology
Material Type:
Assessment
Full Course
Lecture Notes
Provider:
Delft University of Technology
Provider Set:
Delft University OpenCourseWare
02/19/2016
Conditional Remix & Share Permitted
CC BY-NC-SA
Rating
0.0 stars

This course is the 2nd in a three part series intended to support the flipped classroom approach for traditional basic electronics classes. Basic Electronics 2 covers capacitors and the transient capacitor charge and discharge process, inductors and the transient inductor storage and release process, sinusoidal properties, complex numbers and complex impedance, phasors, AC Ohm’s Law, series AC circuit analysis, parallel AC circuit analysis, and series-parallel AC circuit analysis. The text includes discussions of Kirchhoff’s Voltage Law, the AC Voltage Divider Rule, Kirchhoff’s Current Law, and the AC Current Divider Rule. Additionally the text covers use of AC voltmeters, AC ammeters, function generators, and oscilloscopes. These resources are meant to accompany a hands on lab with the guidance of an instructor.

Subject:
Career and Technical Education
Electronic Technology
Material Type:
Textbook
Provider:
OpenOregon
Author:
Jim Pytel
03/04/2020
Conditional Remix & Share Permitted
CC BY-NC-SA
Rating
0.0 stars

This course is the 3rd installment in a three part series intended to support the flipped classroom approach for traditional basic electronics classes. Basic Electronics 3 covers apparent, real, and reactive power and power factor, power factor correction, ideal and non-ideal transformers, and transformer connection diagrams, AC circuit analysis techniques and theorems like source conversion, the AC superposition theorem, AC Thevenin’s Theorem, and the AC Maximum Power Transfer Theorem, 3 phase AC systems including balanced and unbalanced 4 wire Y configurations, 3 wire Y configurations, and delta configurations, the single wattmeter method and the two wattmeter method. These resources are meant to accompany a hands on lab with the guidance of an instructor.

Subject:
Career and Technical Education
Electronic Technology
Material Type:
Textbook
Provider:
OpenOregon
Author:
Jim Pytel
03/04/2020
Conditional Remix & Share Permitted
CC BY-NC-SA
Rating
0.0 stars

This course covers sensing and measurement for quantitative molecular/cell/tissue analysis, in terms of genetic, biochemical, and biophysical properties. Methods include light and fluorescence microscopies; electro-mechanical probes such as atomic force microscopy, laser and magnetic traps, and MEMS devices; and the application of statistics, probability and noise analysis to experimental data.

Subject:
Biology
Career and Technical Education
Electronic Technology
Mathematics
Natural Science
Statistics and Probability
Material Type:
Full Course
Provider:
M.I.T.
Provider Set:
M.I.T. OpenCourseWare
Author:
So, Peter
01/01/2006
Unrestricted Use
CC BY
Rating
0.0 stars

Developed as part of a Round 14 Textbook Transformation Mini-Grant, this D2L course export provides a set of support resources in teaching Blockchain and Smart Contracts including presentations and notes.

This special course is designed to equip students with core foundational knowledge and innovative concepts, techniques, and industrial-strength tools for perceiving and developing blockchain and smart contracts in an engineering-supported manner. The course introduces blockchain-related practices and shows how to apply these practices to build decentralized applications using hands-on programming and research-led projects.

Subject:
Applied Science
Career and Technical Education
Electronic Technology
Information Science
Material Type:
Full Course
Author:
Reza Parizi
10/27/2020
Conditional Remix & Share Permitted
CC BY-NC-SA
Rating
0.0 stars

Subject:
Applied Science
Career and Technical Education
Electronic Technology
Engineering
Material Type:
Full Course
Provider:
M.I.T.
Provider Set:
M.I.T. OpenCourseWare
Author:
Charvat, Gregory L.
Fenn, Alan J.
Herd, Jeffrey S.
Kogon, Steve
Williams, Jonathan H.
01/01/2010
Conditional Remix & Share Permitted
CC BY-NC-SA
Rating
0.0 stars

First published in 1981 by MIT Press, Continuum Electromechanics, courtesy of MIT Press and used with permission, provides a solid foundation in electromagnetics, particularly conversion of energy between electrical and mechanical forms. Topics include: electrodynamic laws, electromagnetic forces, electromechanical kinematics, charge migration, convection, relaxation, magnetic diffusion and induction interactions, laws and approximations of fluid mechanics, static equilibrium, electromechanical flows, thermal and molecular diffusion, and streaming interactions. The applications covered include transducers, rotating machines, Van de Graaff machines, image processing, induction machines, levitation of liquid metals, shaping of interfaces in plastics and glass processing, orientation of ferrofluid seals, cryogenic fluids, liquid crystal displays, thunderstorm electrification, fusion machines, magnetic pumping of liquid metals, magnetohydrodynamic power generation, inductive and dielectric heating, electrophoretic particle motion, electrokinetic and electrocapillary interactions in biological systems, and electron beams. "

Subject:
Applied Science
Career and Technical Education
Electronic Technology
Engineering
Material Type:
Full Course
Provider:
M.I.T.
Provider Set:
M.I.T. OpenCourseWare
Author:
Silva, Manuel L.
Zahn, Markus
01/01/2009
Conditional Remix & Share Permitted
CC BY-NC-SA
Rating
0.0 stars

Welcome to DC Electrical Circuit Analysis, an open educational resource (OER). The goal of this text is to introduce the theory and practical application of analysis of DC electrical circuits. It is offered free of charge under a Creative Commons non-commercial, share-alike with attribution license. For your convenience, along with the free pdf and odt files, print copies are available at a very modest charge. Check my web sites for links.

This text is based on the earlier Workbook for DC Electrical Circuits, which it replaces. The original expository text has been greatly expanded and includes many examples along with computer simulations. For the convenience of those who used the Workbook, many of the problem sets are the same, with some re-ordering depending on the chapter.

Chapter 1: Fundamentals
Chapter 2: Basic Quantities
Chapter 3: Series Resistive Circuits
Chapter 4: Parallel Resistive Circuits
Chapter 5: Series-Parallel Resistive Circuits
Chapter 6: Analysis Theorems and Techniques
Chapter 7: Nodal & Mesh Analysis, Dependent Sources
Chapter 8: Capacitors
Chapter 9: Inductors
Chapter 10: Magnetic Circuits and Transformers

Subject:
Career and Technical Education
Electronic Technology
Material Type:
Textbook
Author:
James M. Fiore
07/27/2020
Conditional Remix & Share Permitted
CC BY-NC-SA
Rating
0.0 stars

This supplement is intended for an introductory electrical circuits course offered in a two or four year electrical engineering technology program. It features approximately 500 problems in DC electrical circuits ranging from introductory concepts and units through resistor color code, series, parallel, series-parallel and multi-source source circuits using voltage and current sources. Coverage includes Thévenin's and Norton's Theorems, maximum power transfer, source conversions, mesh & nodal analysis and superposition. Introductory material on capacitors and inductors with RL and RC transients rounds out the collection. Problems in each section are divided into four categories: Analysis, Design, Challenge and Simulation. Answers to the odd-numbered Design and Analysis problems are given in the appendix.

Subject:
Applied Science
Career and Technical Education
Electronic Technology
Engineering
Material Type:
Textbook
Provider:
Mohawk Valley Community College
Author:
James Fiore
12/01/2017
Unrestricted Use
CC BY
Rating
0.0 stars

Welcome to Digital Electronics

In this module, learners will be introduced to analog and digital signals and how they are represented and used in electronic circuits and devices.

Module Goals

Upon completion of this course the learner should be able to:

• Demonstrate understanding of analog and digital signals and their representations.

• Perform analytic expression and minimization of Boolean functions.

• Design, build and test combinational and sequential circuits.

• Demonstrate an understating of microprocessor and microcontroller based systems.

Subject:
Career and Technical Education
Electronic Technology
Material Type:
Module
Provider:
African Virtual University
Provider Set:
OER@AVU
Author:
Mercy Mbise
02/22/2018
Conditional Remix & Share Permitted
CC BY-NC-SA
Rating
0.0 stars

The course treats: the discrete Fourier Transform (DFT), the Fast Fourier Transform (FFT), their application in OFDM and DSL; elements of estimation theory and their application in communications; linear prediction, parametric methods, the Yule-Walker equations, the Levinson algorithm, the Schur algorithm; detection and estimation filters; non-parametric estimation; selective filtering, application to beamforming.

Subject:
Career and Technical Education
Electronic Technology
Material Type:
Activity/Lab
Lecture Notes
Provider:
Delft University of Technology
Provider Set:
Delft University OpenCourseWare
Author:
G.J.T. Leus
02/19/2016
Conditional Remix & Share Permitted
CC BY-NC-SA
Rating
0.0 stars

This course was developed in 1987 by the MIT Center for Advanced Engineering Studies. It was designed as a distance-education course for engineers and scientists in the workplace. Advances in integrated circuit technology have had a major impact on the technical areas to which digital signal processing techniques and hardware are being applied. A thorough understanding of digital signal processing fundamentals and techniques is essential for anyone whose work is concerned with signal processing applications. Digital Signal Processing begins with a discussion of the analysis and representation of discrete-time signal systems, including discrete-time convolution, difference equations, the z-transform, and the discrete-time Fourier transform. Emphasis is placed on the similarities and distinctions between discrete-time. The course proceeds to cover digital network and nonrecursive (finite impulse response) digital filters. Digital Signal Processing concludes with digital filter design and a discussion of the fast Fourier transform algorithm for computation of the discrete Fourier transform.

Subject:
Applied Science
Career and Technical Education
Electronic Technology
Engineering
Material Type:
Full Course
Provider:
M.I.T.
Provider Set:
M.I.T. OpenCourseWare
Author:
Oppenheim, Alan V.
01/01/2010
Conditional Remix & Share Permitted
CC BY-NC-SA
Rating
0.0 stars

Upon successful completion of this course, students will be able to: * Create lumped parameter models (expressed as ODEs) of simple dynamic systems in the electrical and mechanical energy domains * Make quantitative estimates of model parameters from experimental measurements * Obtain the time-domain response of linear systems to initial conditions and/or common forcing functions (specifically; impulse, step and ramp input) by both analytical and computational methods * Obtain the frequency-domain response of linear systems to sinusoidal inputs * Compensate the transient response of dynamic systems using feedback techniques * Design, implement and test an active control system to achieve a desired performance measureMastery of these topics will be assessed via homework, quizzes/exams, and lab assignments.

Subject:
Applied Science
Career and Technical Education
Electronic Technology
Engineering
Material Type:
Full Course
Provider:
M.I.T.
Provider Set:
M.I.T. OpenCourseWare
Author:
Rowell, Derek
01/01/2008
Conditional Remix & Share Permitted
CC BY-NC-SA
Rating
0.0 stars

After this course the student can:
Understand mechanical system requirements for Electric Drive
Understand and apply passive network elements (R, L, C), laws of Kirchhof, Lorentz, Faraday
Understand and apply: phasors for simple R,L,C circuits
Understand and apply real and reactive power, rms, active and reactive current, cos phi
Describe direct current (DC), (single phase) alternating current (AC) and (three phase) alternating current systems, star-delta connection
Understand the principle of switch mode power electronic converters, pole as a two quadrant and four quadrant converter
Understand principles of magnetic circuits, inductances and transformers

Subject:
Applied Science
Career and Technical Education
Electronic Technology
Engineering
Material Type:
Activity/Lab
Assessment
Lecture Notes
Provider:
Delft University of Technology
Provider Set:
Delft University OpenCourseWare
Author:
Prof.dr.ir. P. Bauer
02/03/2016
Conditional Remix & Share Permitted
CC BY-NC-SA
Rating
0.0 stars

The course gives an overview of different types of electrical machines and drives. Different types of mechanica loads are discussed. Maxwell's equations are applied to magnetic circuits including permanent magnets. DC machines, induction machines, synchronous machines, switched reluctance machines, brushless DC machines and single-phase machines are discussed with the power electronic converters used to drive them.Study Goals After following this course the students should have an overview over the different types of electrical machines and the way they are used in drive systems and they should be able to derive equations describing the steady-state performance of these machines

Subject:
Applied Science
Career and Technical Education
Electronic Technology
Engineering
Material Type:
Full Course
Provider:
Delft University of Technology
Provider Set:
Delft University OpenCourseWare
Author:
H. Polinder
02/08/2016
Conditional Remix & Share Permitted
CC BY-NC-SA
Rating
0.0 stars

This course introduces principles and mathematical models of electrochemical energy conversion and storage. Students study equivalent circuits, thermodynamics, reaction kinetics, transport phenomena, electrostatics, porous media, and phase transformations. In addition, this course includes applications to batteries, fuel cells, supercapacitors, and electrokinetics.

Subject:
Applied Science
Career and Technical Education
Chemistry
Electronic Technology
Engineering
Physical Science
Material Type:
Full Course
Provider:
M.I.T.
Provider Set:
M.I.T. OpenCourseWare
Author:
Bazant, Martin